CONCRETE  PROTECTION

Concrete Protection_2

Concrete Structures are exposed to a wide range of deleterious environmental conditions including but not limited to carbonation, salts & chemical attack.

As a result of water ingress, temperature variations, overloading, chemical, gas and chloride attack concrete becomes stressed and damaged.

The most Common causes of reinforcement and concrete damage are chlorides and carbonation. Asset  managers need to understand these processes to ensure the best maintenance strategy.   With 40 years of experience Cormix understands the processes and necessary repair & protection to extend the life of both new & old structures. Cormix provides often unique solutions in accordance with the principles & methods defined in European standard EN 1504 & other local standards such as ASTM .

For a complete understanding of Cormix products & Concrete Repair.>Click here for our manual. 

Reinforcement corrosion Protection

DESIGNATION
DESCRIPTION
PRINCIPLE USES
COVERAGE / YIELD
TDS
CONPATCH NCI

Surface applied migrating corrosion inhibitor.

Used on concrete in all areas where the reinforcement is at risk of corrosion.

Approximately 3.5-4 m²/Ltr/Coat.

CONGARD ST

High build, surface tolerant epoxy coating for rebar & steel.

For rebar and steel protection.

6.5 m2/litre at 125 microns DFT.

CONGARD ZINC

A 2 component zinc epoxy primer for coating rebar and steel.

For coating rebar in concrete repairs or where steel is exposed to the elements.

11.8 m2/litre at 50 microns DFT.

CONPATCH 600 MCI

One part polymer modified fine concrete repair mortar incorporating a corrosion inhibitor

For concrete repairs where a fine structural repair material is required with incorporation of a corrosion inhibitor.

Approx. 2 kg/m2/mm thickness

Hydrophobic Impregnations

CONTITE WATERSHIELD

Contite Watershield is a water based, VOC free,non flammable penetrating water repellent sealer specifically formulated for the protection of a wide variety of surfaces.

Uses include to protect concrete structures such as above grade tanks ,reservoirs, columns ,bridges, building facades ,both old and new and other structures. Suitable for all tiles including ceramic, marble, slate and terracotta.

0.20 litre  /m2

CONTITE HHH

A unique triple action water based spray applied waterproofer and water repellent using water repellent and crystallization technology. Prolongs the life span of all concrete Structures.

Waterproofing & Sealing of bridge decks, concrete storage tanks. carparks, podiums, airport, jetties runways, highway etc.

*5m2 litre coat.Depending on porosity and absorption of substrate

Carbonation Coatings

ELASTODECK S

A single component acrylic water based anti carbonation protective coating.

To protect reinforced concrete structures from attack by salts, sulphates, atmospheric gases and other water based contaminants.

Approx 3 m2/litre/coat @150 microns DFT.

ELASTOCLAD

A single component water based high solids 100% acrylic liquid applied UV resistant elastomeric waterproofing membrane & anti carbonation coating.

Waterproofing membrane for facades, roofs, walls, gutters, bathrooms, balconies etc.

Approx.2.8 m2/litre/coat@150 microns. DFT

Share