Elastomeric Coating / Membanes

elastomeric-coating
DESIGNATION
DESCRIPTION
PRINCIPLE USES
COVERAGE / YIELD
TDS
ELASTOCLAD

A single component water based high solids 100% acrylic liquid applied UV resistant elastomeric waterproofing membrane & anti carbonation coating.

Waterproofing membrane for facades, roofs, walls, gutters, bathrooms, balconies etc.

Approx.2.8 m2/litre/coat
@150 microns. DFT

ELASTOCLAD HR

A single component water based high solids 100% acrylic liquid applied UV resistant & heat reflective elastomeric waterproofing membrane.

Use for heat insulation and waterproofing of roofs, walls, steel structures etc. where both waterproofing and heat reduction is required.

0.51 litre/m2@300 microns DFT
0.85 litre/m2@500 microns DFT

ELASTOCLAD PU

A fully bonded high solids polyurethane liquid applied waterproofing membrance. Full permanent immersion.

For waterproofing all types of substrates. Use in tunnels, underground structures. wet areas exposed roofs, roof gardens, basements, balconies, water tanks, pools etc.

* 2 coats 1.40 ltr/m2  to obtain dry film thickness of 1.2 mm.

ELASTOCLAD PU(N)

A fully bonded high performance modified polyurethane liquid applied waterproofing membrane.

For waterproofing all types of substrates. Use in tunnels, underground structures, wet areas exposed roofs, roof gardens, basements, balconies, water tanks, pools etc.

*2 coats at1.40 litre/m2
@800 micron. DFT

ELASTODECK S

A single component acrylic water based anti carbonation protective coating.

To protect reinforced concrete structures from attack by salts, sulphates, atmospheric gases and other water based contaminants.

3 m2/litre/coat @150 microns DFT.

Elastomeric Coating / Membanes

elastomeric-coating

DESIGNATION : ELASTOCLAD

DESCRIPTION : A single component water based high solids 100% acrylic liquid applied UV resistant elastomeric waterproofing membrane & anti carbonation coating.

Waterproofing membrane for facades, roofs, walls, gutters, bathrooms, balconies etc.

COVERAGE / YIELD : Approx.2.8 m2/litre/coat
@150 microns. DFT

DESIGNATION : ELASTOCLAD HR

DESCRIPTION :A single component water based high solids 100% acrylic liquid applied UV resistant & heat reflective elastomeric waterproofing membrane.

Use for heat insulation and waterproofing of roofs, walls, steel structures etc. where both waterproofing and heat reduction is required.

COVERAGE / YIELD :0.51 litre/m2@300 microns DFT
0.85 litre/m2@500 microns DFT

DESIGNATION : ELASTOCLAD PU

DESCRIPTION : A fully bonded high solids polyurethane liquid applied waterproofing membrance. Full permanent immersion.

For waterproofing all types of substrates. Use in tunnels, underground structures. wet areas exposed roofs, roof gardens, basements, balconies, water tanks, pools etc.

COVERAGE / YIELD : * 2 coats 1.40 ltr/m2  to obtain dry film thickness of 1.2 mm.

DESIGNATION : ELASTOCLAD PU(N)

DESCRIPTION :A fully bonded high performance modified polyurethane liquid applied waterproofing membrane.

For waterproofing all types of substrates. Use in tunnels, underground structures, wet areas exposed roofs, roof gardens, basements, balconies, water tanks, pools etc.

COVERAGE / YIELD :*2 coats at1.40 litre/m2
@800 micron. DFT

DESIGNATION : ELASTODECK S

DESCRIPTION :A single component acrylic water based anti carbonation protective coating.

To protect reinforced concrete structures from attack by salts, sulphates, atmospheric gases and other water based contaminants.

COVERAGE / YIELD :3 m2/litre/coat @150 microns DFT.